Xerox WorkCentre 6027

Maintenance
Xerox
®
WorkCentre
®
6027 Multifunction Printer 165
User Guide
Adjusting the Touchscreen
You can use the Adjust Touchscreen feature to calibrate the touch positions on the touchscreen.
To adjust the touchscreen:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Service Tools.
5. Touch Adjust Touchscreen.
6. Read the instructions, then touch OK.
7. Touch each cross as it appears.
Note: To improve the accuracy of the adjustment, to touch the center of each cross, use a stylus.
8. Touch OK.
9. To return to the Services Home menu, press the Services Home button.