Xerox WorkCentre M20i - Auto Send to Self

Xerox WorkCentre M20i System Administration Guide Page 9-17
Scan to Email
Auto Send to Self
This feature allows you to send a copy of the Email to yourself.
To set auto send to self:
¾ Press the [Machine Status] button.
1
2
¾ Press or until System
Admin Tools is displayed and
press [Enter].
¾ If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Press or until Email
Setup is displayed and press
[Enter].
¾ Press or until Auto Send
to Self is displayed and press
[Enter].
Email Setup
[Auto Send to Self]
4
¾ If you want to send a copy to
yourself, press or until
On is displayed and press [Enter].
Otherwise, choose Off and press
[Enter].
Auto Send to Self
[On]