Xerox WorkCentre M20i - Installing Flash Postscript Fonts

Xerox WorkCentre M20i System Administration Guide Page 11-31
Administration Tools
Installing Flash PostScript Fonts
Flash PS fonts may be supplied on a CD or downloaded from the internet. Use these
instructions to install flash PS fonts in the WorkCentre M20i. You can also delete all of the fonts
and print a font listing.
To install flash PS fonts, perform these steps:
¾ Enable CentreWare Internet Services (see “Enabling Internet Services” on page 11-20).
¾ At the CentreWare Internet Services Home Page for the WorkCentre M20i, select the
[Maintenance] tab.
Enter your [Admin User Name] and [Password].
Select the plus symbol [+] to the left of the Flash Font and Macro folder in the
Maintenance frame.
¾ In the Maintenance frame, within the Flash Font and Macro folder, select [Flash PS Font].
¾ Insert the CD or download the file from the internet.
¾ Enter the file name and location or [Browse] to the location and select the file.
¾ Click the [Upgrade] button.
¾ To delete all fonts, click the [Delete All] button.
¾ To print a PCL font listing, click the [Print List] button.
1
2
3
4
5
6
7
8