Xerox WorkCentre M20i - Network Setup; Config Network

Xerox WorkCentre M20i System Administration Guide Page 2-11
Basic Network Installation
¾ Continue with Workstation Setup on page 2-12.
5
¾ Press or until Configure
Network is displayed and press
[Enter].
Network Setup
[Config. Network]
6
¾ Press or until Manual is
displayed and press [Enter].
Config Network
[Manual]
7
¾ For each address, press or
until the required setting is
displayed and press [Enter].
Manual
[IP Address]
8
¾ Enter the address using the
keyboard and press [Enter].
Press
the period on the
keyboard to insert the dot
between each group.
IP Address
[xxx.xxx.xxx.xxx]
9