Xerox WorkCentre M20i - Add Authenticated Users

Xerox WorkCentre M20i System Administration Guide Page 9-9
Scan to Email
Add Authenticated Users
This feature allows you to add authenticated users from the WorkCentre M20i.
To add authenticated users:
¾ Press the [Machine Status] button.
1
2
¾ Press or until System
Admin Tools is displayed and
press [Enter].
¾ If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Press or until Email
Setup is displayed and press
[Enter].
¾ Press or until Auth User
Setup is displayed and press
[Enter].
Email Setup
[Auth User Setup