Xerox WorkCentre M20i - Default from

Xerox WorkCentre M20i System Administration Guide Page 9-15
Scan to Email
Default From
This feature allows you to automatically enter information into the From field of the Email.
NOTE: The Default From has to contain a valid Email address.
To enter a default from:
¾ Press the [Machine Status] button.
1
2
¾ Press or until System
Admin Tools is displayed and
press [Enter].
¾ If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Press or until Email
Setup is displayed and press
[Enter].
¾ Press or until Default
From is displayed and press
[Enter].
¾ Enter the Default From using the
keyboard otherwise the machine
will use the [User Email Address]
Email Setup
[Default From]