Xerox WorkCentre M20i System Administration Guide Page 9-3
Scan to Email
Information Checklist
These instructions for configuring Scan-to-Email at the WorkCentre M20i. Configuration can
also be performed using Xerox CentreWare (Refer to “Network Installation Using Internet
Services” on page 7-1). Before starting the installation procedures, please ensure the
following items are available or have been performed:
If problems are encountered during the WorkCentre M20i installation, refer to the Problem
Solving chapter for assistance.
Item By
Ensure that the network has a fully functioning SMTP Mail Server. Customer
It is recommended that the network has a fully functioning LDAP
Server.
Customer
Ensure the WorkCentre M20i is fully functioning on the network prior
to installation.
Customer
Ensure that the TCP/IP protocol is configured on the device and is
fully functional
Customer
Install WorkCentre M20i Email and Network Scanning Services kit. Xerox/Customer
To Next Page
Loading...
