Xerox WorkCentre M20i - Enabling or Disabling Auxiliary Access

Xerox WorkCentre M20i System Administration Guide Page 11-37
Administration Tools
Enabling or Disabling Auxiliary Access
Auxiliary Access allows a foreign interface board to be recognized.
To enable or disable Auxiliary Access:
¾ Press the [Machine Status] button.
1
2
¾ Press or until System
Admin Tools is displayed and
press [Enter].
¾ If the System Admin Tools has
already been passcode
protected, type in the password
and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Press or until Auxiliary
Access is displayed and press
[Enter].
¾ To enable Auxiliary Access, press
or until On is displayed
and press [Enter]. Otherwise
display Off and press [Enter].
System Admin Tools
[Auxiliary Access]