Page 11-16 Xerox WorkCentre M20i System Administration Guide
Administration Tools
Notify Toner Low
This will be used to notify a specified email address when the toner is running low in order to
send a fax to order a new supply automatically.
To notify a low toner situation:
¾ Press the [Machine Status] button.
1
2
¾ Press or until System
Admin Tools is displayed and
press [Enter].
¾ If the System Admin Tools has
already been passcode
protected, type in the password
and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Press or until Notify
Toner Low is displayed and press
[Enter].
Maintenance
[Notify Toner Low]
4
¾ Press or until On is
displayed and press [Enter].
¾ When prompted, enter:
Your Customer Number
Your Customer Name
The Supplier’s Fax Number
The Suppliers Name
Notify Toner Low
[On]
To Next Page
Loading...
