Page 11-36 Xerox WorkCentre M20i System Administration Guide
Administration Tools
Downloading PostScript Fonts
PostScript fonts may be supplied on a CD or downloaded from the internet. Use these
instructions to install PostScript fonts in the WorkCentre M20i. You can also delete individual
fonts, all of the fonts and print a listing.
To install PostScript fonts, perform these steps:
¾ Start the ControlCentre application.
¾ Select the [PostScript] tab.
Enter your [Admin User Name] and [Password].
¾ Insert the CD or download the upgrade from the internet.
¾ Click the [Add] button and enter the file name and location or [Browse] to the location and
select the file.
¾ To delete an individual font, highlight the font and click the [Delete] button.
¾ To delete all fonts, click the [Delete All] button.
¾ To print a list of installed fonts, click the [Print List] button.
1
2
3
4
5
6
7
To Next Page
Loading...
