Xerox WorkCentre M20i - Fax Forwarding

Xerox WorkCentre M20i System Administration Guide Page 10-3
Fax
Fax Forwarding
This feature sets up the forwarding details for faxes. This can be set for received and or
transmitted faxes and can also print a copy at the WorkCentre M20i.
To configure fax forwarding:
¾ Press the [Machine Status] button.
1
2
¾ Press or until System
Admin Tools is displayed and
press [Enter].
¾ If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Press or until Fax/Email
Forward is displayed and press
[Enter].
¾ Press or until Fax is
displayed and press [Enter].
Setup Forward
[Fax]