Page 11-4 Xerox WorkCentre M20i System Administration Guide
Administration Tools
Printing Department Data
This setting is used to print two reports, Department Code report and a Department Journal.
To print department data:
¾ Press the [Machine Status] button.
1
2
¾ Press or until System
Admin Tools is displayed and
press [Enter].
¾ If the System Admin Tools has
already been passcode
protected, type in the password
and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Press or until
Department is displayed and
press [Enter].
¾ Enter the master access code.
NOTE: The first time that you
access Department, you will be
prompted to enter a master
access code then re-enter it to
confirm the code.
System Admin Tools
[Department]
4
¾ Press or until Print is
displayed and press [Enter].
¾ Press or until the
required report is displayed and
press [Enter].
Department
[Print]
To Next Page
Loading...
