Xerox WorkCentre M20i - Mailbox Setup; Create a Mailbox

Xerox WorkCentre M20i System Administration Guide Page 10-5
Fax
Mailbox Setup
This feature sets up the forwarding details for faxes. This can be set for received and or
transmitted faxes and can also print a copy at the WorkCentre M20i.
Create a Mailbox
To create a mailbox:
¾ Press the [Machine Status] button.
1
2
¾ Press or until System
Admin Tools is displayed and
press [Enter].
¾ If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Press or until Mailbox
Setup is displayed and press
[Enter].
¾ Press or until Mailbox is
displayed and press [Enter].
Mailbox Setup
[Mailbox]
4
¾ Press or until Create is
displayed and press [Enter].
Mailbox
[Create]