Xerox WorkCentre M20i - SMTP IP Address

Xerox WorkCentre M20i System Administration Guide Page 9-5
Scan to Email
SMTP IP Address
This feature allows you set the IP address of the SMTP server.
To enter the SMTP IP address:
¾ Press the [Machine Status] button.
1
2
¾ Press or until System
Admin Tools is displayed and
press [Enter].
¾ If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Press or until Email
Setup is displayed and press
[Enter].
¾ Press or until SMTP
Server Setup is displayed and
press [Enter].
Email Setup
[SMTP Server Setup]
4
¾ Press or until SMTP
Server IP is displayed and press
[Enter]
¾ Enter the SMTP IP address using
the keypad.
Press
the period on the
keyboard to insert the dot
between each group.
SMTP Server Setup
[SMTP Server IP]