Xerox WorkCentre M20i - Billing Counters

Xerox WorkCentre M20i System Administration Guide Page 11-19
Administration Tools
Billing Counters
Billing can display the contents of a number of counters used in the WorkCentre M20i. These
counters are:
¾ Total Impressions - the total number of prints produced by the machine.
¾ Toner Impressions - the number of prints produced by the toner.
¾ Drum Impressions - the number of prints produced by the drum.
¾ DADF Scan Page - the number of originals scanned from the DADF.
¾ Platen Scan Page - the number of originals scanned from the document glass.
¾ Replaced Toner - the number of prints when the toner was last replaced.
¾ Replaced Drum - the number of prints when the drum was last replaced.
¾ Press the [Machine Status] button.
1
2
¾ Press or until System
Admin Tools is displayed and
press [Enter].
¾ If the System Admin Tools has
already been passcode
protected, type in the password
and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Press or until Billing is
displayed and press [Enter].
¾ Press or until the
required counter is displayed and
press [Enter].
System Admin Tools
[Billing]