Page 8-2 Xerox WorkCentre M20i System Administration Guide
Local Connection
Information Checklist
Before starting the installation procedures, please ensure the following items are available or
have been performed:
NOTE: The installation procedures will install the WorkCentre M20i on the host
workstation. The procedure is not intended to connect the host workstation to other
workstations.
If problems are encountered during the WorkCentre M20i installation, refer to the Problem
Solving chapter for assistance.
Item By
IEEE 1284C Parallel Port Cable Customer
USB cable Xerox
Test t he WorkCentre M20i Copier/Fax to ensure it is installed fully and
functioning correctly.
Customer
WorkCentre M20i drivers. Xerox
To Next Page
Loading...
