Xerox WORKCENTRE PE 220 User Manual

Image Quality
Workcentre PE 220 11/05 3-13
IQ 13 Contamination on the Face of Page
Description
The background on the face of the printed page is contaminated.
IQ 14 Contamination on Back of Page
Description
The back of the page is contaminated at 47 mm intervals.
Check and Cause Solution
1. Toner leakage due to improperly
sealed developer.
1. Install a new print cartridge, PL 1.
2. The transfer roller maybe con-
tamInated.
2. Run DRUM Cleaning Mode, GP 3
.
Make 2 or 3 prints
3. The fuser roll may be contami-
nated
3. Inspect and clean the fuser roll,
PL 7
. Replace if necessary.
Check and Cause Solution
1. Transfer roller is contaminated. 1. Run DRUM Cleaning Mode, GP 3.
Make 2 or 3 prints
2. Replace the transfer roller, PL 6
.
2. Pressure roller is contaminated. CAUTION
Take care not to bend or break the
thermistor.
3. Clean the heat roll, pressure roll
and thermistor. If necessary install a
new fuser, PL 1
.

Xerox WORKCENTRE PE 220 Specifications

General

Brand	Xerox
Model	WORKCENTRE PE 220
Category	All in One Printer
Language	English