General Procedures and Information
6-40 11/05 Workcentre PE 220
GP 5 Control Panel
Control Panel Functions
Figure 1
Lighten/Darken Adjusts the brightness of the documents for the current copy job.
Original Type Selects the document type for the current copy job.
Reduce/Enlarge Makes a copy smaller or larger than the original.
Favourite Copy Allows you to use one of teh special copy features, such as Clone, Colla-
tion, Auto fit, 2 Sides on 1 page, 2/4 Up (multiple pages on a sheet), and
Poster copying after assigning it.
Displays the current status and prompts during an operation.
Used to scroll through tthe available options for the selected menu item.
Enter Confirms the selection on the display.
Menu Enters Menu mode and scrolls through the menus available.
Exit Sends you back to the upper menu level.
Start Starts a job.
Stop/Clear Stops an operation at any time.
In Standby mode, clears/cancels the copy options,
such as the darkness, the document type setting,
the copy size and the number of copies.
Number Keypad Dials a number or enters alphanumeric characters.
Resolution Adjusts the resolution of the documents for the current fax job.
Broadcasting Allows you to send a fax to multiple destinations.
Phone Book Allows you to store frequently dialled fax numbers as one or two-digit
speed dial or group dial numbers for automatic dialling and edit the stored
numbers. Also allows you to print a Phonebook list.
Redial/Pause In Standby mode, redials the last number or in Edit mode, inserts a pause
into a fax number.
Manual Dial Engages the telephone line.
Scan Selects the scan feature software (Printer Settings Utility) provided.
Toner Save Allows you to save on toner by using less toner to print a document.
Copy Selects the copy feature.
Fax Selects the Fax feature.
To Next Page
Loading...
Need help?
General
