Repairs/Adjustments
4-6 11/05 Workcentre PE 220
3. To remove the Rear cover, make sure the
right Power Switch does not get jammed
to the Rear Cover.
Figure 3
4. If necessary, remove the Jam Cover in
the direction of arrow.
Figure 4
REP 6 Right Cover
1. Before you remove the Right Cover, you
should remove:
- Front Cover (Refer to REP 3)
- Rear Cover (Refer to REP 5)
2. Remove the screw securing the Right
Cover.
Figure 1
3. Apply light pressure to the back of the
Right Cover and pull it to the right side in
the direction of the arrow.
Figure 2
To Next Page
Loading...
