XIMEA xiC - User Interface - LEDs

xiC - Technical Manual Version 1.16
48
3.6. User interface – LEDs
Four status LEDs are located on the back of the cameras, please see below.
figure 3-31, position status LEDs
All LEDs can be configured similar as standard input and output lines.
Default LED function after power on
LED
Color
Power-on defaults
Note
1
Red
On
User configurable
2
Green
Exposure active
User configurable
3
Blue
Frame active
User configurable
4
Orange
Connection status
User configurable
table 3-21, LED output description
LED statuses during boot sequence
Status
LED1 (Red)
LED2 (Green)
LED3 (Blue)
LED4 (Orange)
Off
Off
Off
Off
Off
Power
On
Off
Off
Off
Booting
Off
flash ~2Hz
flash ~2Hz
Off
Boot up finished
On
Off
Off
On
USB init - wait for enumeration
flash ~1Hz
Off
Off
Off
Enumeration finished USB2
Off
Off
Off
flash ~2Hz
Enumeration finished USB3
Off
Off
Off
On
Device stop
flash ~2Hz
Off
Off
flash ~2Hz
Error
flash ~2Hz
Off
Off
flash async.
table 3-22, LED status during boot
Default LED function after xiOpenDevice
LED
Color
LED function
1
Red
On
2
Green
Exposure active
3
Blue
Frame active
4
Orange
On
table 3-23, LED output description
xiC
1
2
3
4
MC050CG-SY-FL
CICAF1623001
Made in SK
USB 3.1 Gen 1
LED1
LED2
LED3
LED4