1. Notice to XPENG Owners
12
4. After charging is completed, press the "Unlock" button of
the key or click the "End Charging" button on the CID to
unlock the charging gun. At the same time, unplug the
charging gun and put it back to the specified position.
►
The charging port lid will close automatically when
the charging gun is unplugged.
Battery PreheatingBattery Preheating
─
This function can enable the vehicle to heat the traction
battery with electricity from the AC charging pile after
being parked for a longer period of time in cold weather,
and to stop heating when the temperature reaches the
specified limit, which can effectively improve the range
and power performance of the vehicle in winter.
─
Before activating this function, connect the vehicle to the AC
charging pile that works normally, and make sure the state of
charge is greater than 40% of the maximum charging value.
─
Activate this function or make a schedule by clicking the
icon in the CID status bar to enter the "Energy Center"
panel or on the mobile App.
Caution
●
It is recommended to use the vehicle as soon as
possible after the battery preheating, since prolonged
parking may reduce the heating eect.
●
This function is disabled if the power battery
temperature is high.
●
If you have made a charging schedule, please make
sure the preheating time is set later than the scheduled
charge time.
●
This function may slightly increase the power
consumption of the charging pile. Please use it as
needed.
●
If the function fails to be activated, please check if the
conditions are met, and contact your local authorized
service center for troubleshooting.
https://www.automotive-manuals.net
To Next Page
Loading...
