1. Notice to XPENG Owners
1
2
3
4
5
6
7
8
9
10
11
13
Emergency UnlockingEmergency Unlocking
If the charging gun cannot be unplugged after several attempts
to unlock, you can pull down the right rear seat back and
remove the trim lid to pull the mechanical pull lock of the
charging gun to unlock. Then you can unplug the charging gun.
DC ChargingDC Charging
DC charging takes a shorter time.
1. Open the charging port lid. Refer to Page 11.
2. Take the charging gun and plug it vertically into the DC
charging port.
►
Do not shake the charging gun when plugging it.
3. Observe the charging indicator lights. Refer to Page 10.
4. After charging is completed, press the "Unlock" button of
the key or click the "End Charging" button on the CID to
unlock the charging gun. At the same time, unplug the
charging gun and put it back to the specified position.
►
The charging port lid will close automatically when
the charging gun is unplugged.
Warning
●
DC charging must be carried out in compliance with
the relevant regulations of the charging station.
●
The charging interface, communication protocol,
and technical requirements should meet the latest
national standards for charging piles. Please check
if the DC charging pile is CCS2 standard compliant
before charging.
https://www.automotive-manuals.net
To Next Page
Loading...
