Yaesu FTM-100DR/DE User Manual

123
Customizing Menu Settings and User Preferences
Setup menu operations: 1 DISPLAY
Setting up the screen display (1 SUB DISPLAY SELECT)
Choose the information be shown on the sub-display.
1 Press and hold for over one second.
The Setup menu appears.
2 Rotate the DIAL to select [1 DISPLAY], then press
.
3 Rotate the DIAL to select [1 SUB DISPLAY
SELECT], then press
.
The sub-display setting screen appears.
4 Rotate the DIAL to select the information to display
on the sub-display.
1 SUB BAND: Displays the sub-band operating
information.
2 TIME: Displays the time.
3 VDD: Displays the voltage.
Tip The default setting: 1 SUB BAND
5 Press and hold for over one second.
Sets the information displayed on the sub-display and returns the display to the
previous operating screen.
Setting the display brightness (2 LCD BRIGHTNESS)
You can adjust the display brightness.
For details, see “Adjusting the display brightness” on page 48.
Setting the display contrast (3 LCD CONTRAST)
You can adjust the display contrast.
For details, see “Adjusting the display brightness” on page 48.

Yaesu FTM-100DR/DE Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Modulation Types	FM, C4FM
Display Type	Color TFT
Memory Channels	1000
GPS	Yes
APRS	Yes
Operating Modes	Simplex, Repeater
Supply Voltage	13.8V DC
Bluetooth	Yes
RF Power Output	50W