Yaesu FTM-100DR/DE User Manual

148
Customizing Menu Settings and User Preferences
Setup menu operations: 13 RST/CLONE
5 Press and hold for over one second.
Returns the display to the previous operating screen.
Recalling the preset setting (3 RECALL PRESET)
You can recall the preset setting from the Setup menu.
1 Press and hold for over one second.
The Setup menu appears.
2 Rotate the DIAL to select [13 RST/CLONE], then
press
.
3 Rotate the DIAL to select [3 RECALL PRESET],
then press
.
The confirmation screen appears.
4 Rotate the DIAL to select [OK?], and then press
.
Recalls the preset setting and returns the display to
the previously viewed screen.
To cancel the Setup menu without any change, select
[Cancel], then press
.
5 Press and hold for over one second.
Returns the display to the previously viewed screen.
Deleting the registered data from the memory channels
(4 MEMORY CH RESET)
Deletes the registered data from the memory channels.
1 Press and hold for over one second.
The Setup menu appears.
2 Rotate the DIAL to select [13 RST/CLONE], then
press
.
The menu list appears.
3 Rotate the DIAL to select [4 MEMORY CH
RESET], then press
.
4 Rotate the DIAL to select [OK?], and then press
.
Tip To cancel resetting, select [Cancel].
Deletes the registered data from the memory channels and returns the screen to the
previously viewed screen.

Yaesu FTM-100DR/DE Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Modulation Types	FM, C4FM
Display Type	Color TFT
Memory Channels	1000
GPS	Yes
APRS	Yes
Operating Modes	Simplex, Repeater
Supply Voltage	13.8V DC
Bluetooth	Yes
RF Power Output	50W