Yaesu FTM-100DR/DE User Manual

54
Using the Memory
Using the Memory
Changing the frequency of the home channel
The default frequency setting of the home channel can be changed.
1 Switch to VFO mode.
2 Rotate the DIAL to tune to the desired home channel frequency.
3 Press and hold for over one second.
The MEMORY WRITE screen appears.
4 Rotate the DIAL to select [HOME].
5 Press .
The overwrite confirmation screen appears.
6 Rotate the DIAL to select [OK?],and then press
.
The home channel frequency is overwritten, and the
new home channel frequency is displayed.
Tip To cancel overwriting, select [Cancel], then press .

Yaesu FTM-100DR/DE Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Modulation Types	FM, C4FM
Display Type	Color TFT
Memory Channels	1000
GPS	Yes
APRS	Yes
Operating Modes	Simplex, Repeater
Supply Voltage	13.8V DC
Bluetooth	Yes
RF Power Output	50W