Yaesu FTM-100DR/DE User Manual

134
Customizing Menu Settings and User Preferences
Setup menu operations: 5 SCAN
Selecting the receiver operation performed after scanning stops
(3 SCAN RESUME)
You can select the receiver operation to be performed after the scanning stops. For
details, see “Selecting the receiver operation performed after scanning stops” on page
63.
Setting the channel signal reception time when using the dual
reception function (4 DUAL WATCH MODE)
Set the time to check the HOME channel when using the dual reception function. For
details, see “Setting the channel signal reception time when using the dual reception
function” on page 71.
Setup menu operations: 6 GM
The GM (group monitor) function enables the transceiver to automatically check whether
the members on the same frequency are within communication range.
For details, refer to the separate GM Function Instruction Manual (download from Yaesu
website).
Setup menu operations: 7 WIRES-X
The WIRES-X is a communication system to broaden the amateur radio communication
linking worldwide using the Internet.
For details, refer to the separate WIRES-X Instruction Manual (download from Yaesu
website).

Yaesu FTM-100DR/DE Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Modulation Types	FM, C4FM
Display Type	Color TFT
Memory Channels	1000
GPS	Yes
APRS	Yes
Operating Modes	Simplex, Repeater
Supply Voltage	13.8V DC
Bluetooth	Yes
RF Power Output	50W