Yaesu FTM-100DR/DE User Manual

20
Before Use
Nameandfunctionofeachcomponent
● GPSINFOscreen
While a received station’s information is displayed,
briefly press the
key to display the GPS INFO
screen.
May also display the compass and the signal level of
each acquired satellite. □ indicates an un-acquired
satellite and ■ indicates an acquired satellite.
Tip From [1DISPLAY] → [4GPSINFORMATION], you can
select “LOCATION” (location display) or “FREQUENCY”
(frequency display).
[Location display]
[Frequency display]
Input characters
You can input letters and characters to enter your call sign and memory channel tags by
following the procedure below.
Switchingthecharactertype
Press ( appears on the upper display). Pressing each time changes the
character type in the following order.
Uppercase letters → symbols → lowercase letters → numbers
Deletingtheinputcharacters
Press ( appears on the upper display).
Deletes all characters to the right side of the cursor including the character on which the
cursor is currently positioning.
Movingthecursortotheleft
Press ( appears on the upper display).
Movingthecursortotheright
Press ( appears on the upper display).
Deletingthemostrecentlyinputcharacter
Press ( appears on the upper display).
Completinginput
Press . To cancel inputting, press .

Yaesu FTM-100DR/DE Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Modulation Types	FM, C4FM
Display Type	Color TFT
Memory Channels	1000
GPS	Yes
APRS	Yes
Operating Modes	Simplex, Repeater
Supply Voltage	13.8V DC
Bluetooth	Yes
RF Power Output	50W