ELECTRICAL SPECIFICATIONS
2-8
EAM20130
ELECTRICAL SPECIFICATIONS
Voltage
System voltage 12 V
Ignition system
Ignition system TCI
Ignition timing (B.T.D.C.) 8.0–12.0 /2000 r/min
Engine control unit
Model BAK2
Ignition coil
Primary coil resistance 2.16–2.64
Secondary coil resistance 8.64–12.96 k
Spark plug cap
Resistance 7.50–12.50 k
Charging system
Charging system AC magneto
Standard output 14.0 V, 10.0 A at 5000 r/min
Stator coil resistance 0.368–0.552
Rectifier/regulator
Regulator type Single-phase
Regulated voltage (DC) 14.0–14.8 V
Battery
Model YTZ7S(F)
Voltage, capacity 12 V, 6.0 Ah (10 HR)
Headlight
Bulb type Halogen bulb
Bulb wattage
Headlight HS1, 35.0 W/35.0 W
Brake/tail light LED
Meter lighting EL (Electroluminescent)
Indicator light
Fuel level warning light 1.7 W
Engine trouble warning light 1.7 W
Starter motor
Brush overall length 7.0 mm (0.28 in)
Brush overall length limit 3.5 mm (0.14 in)
Brush spring force 3.92–5.88 N (400–600 gf, 14.11–21.17 oz)
Mica undercut (depth) 1.50 mm (0.06 in)
Fuel injection sensor
Crankshaft position sensor resistance 228–342
Intake air temperature sensor resistance 5400–6600 at 0 C (5400–6600 at 32 F)
Intake air temperature sensor resistance 290–390 at 80 C (290–390 at 176 F)
Coolant temperature sensor resistance 2513–2777 at 20 C (2513–2777 at 68 F)
Coolant temperature sensor resistance 210–221 at 100 C (210–221 at 212 F)
Fuse(s)
Main fuse 15.0 A
To Next Page
Loading...
