CABLE ROUTING DIAGRAM
2-30
1. Speed sensor lead
2. Front brake hose
3. Clamp
4. Protector
5. Speed sensor
6. Speed sensor bracket
A. Clamp the shrinking tube portion of the
speed sensor lead.
B. Clamp securely the speed sensor lead to the
hook of the protector.
C. Install the front brake hose with its paint
aligning with the upper end of the clamp. The
circumference direction does not matter.
D. Absorb the slack in this section.
E. Pass the front brake hose and speed sensor
lead to the guide of the body. Scratching dur-
ing the work is accepted.
To Next Page
Loading...
