YASKAWA E-II Series User Manual

11.3 List of Parameters
11-15
11
Appendix
Parameter
No.
Name Setting Range Units
Factory
Setting
Setting
Validation
Pn000 Function Selection Basic Switches
−−0000 After restart
0
1
0
1
2
3
4
5
6
7
8
9
A
B
Sets CCW as forward direction.
Sets CW as forward direction (Reverse Rotation Mode).
Reserved (Do not change.)
Speed control (analog reference)
Position control (pulse train reference)
Torque control (analog reference)
Internally set speed control (contact reference)
Internally set speed control (contact reference) Speed control (analog reference)
Internally set speed control (contact reference) Position control (pulse train reference)
Internally set speed control (contact reference) Torque control (analog reference)
Position control (pulse train reference) Speed control (analog reference)
Position control (pulse train reference) Torque control (analog reference)
Torque control (analog reference) Speed control (analog reference)
Speed control (analog reference) Zero clamp
Position control (pulse train reference) Position control (Inhibit)
Direction Selection
Control Method Selection
0 to F
Sets SERVOPACK axis address.
Axis Address
Reserved (Do not change)
4th
digit
3rd
digit
2nd
digit
1st
digit
n.
2 and 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

YASKAWA E-II Series Specifications

General

Brand	YASKAWA
Model	E-II Series
Category	Servo Drives
Language	English