YASKAWA HV600

7.11 o: Keypad-Related Settings
224 YASKAWA TOEPYAIH6B01A HV600 AC Drive Narrow Bypass Installation & Startup
◆ o5: Log Function
No.
(Hex.)
Name Description
Default
(Range)
o5-01
(1551)
RUN
Log Start/Stop Selection Sets the data log function. This parameter is only available on an HOA keypad.
0 : OFF
1 : ON
Note:
You must insert a compatible SD cart into the keypad before you enable this parameter.
0
(0 - 1)
o5-02
(1552)
RUN
Log Sampling Interval Sets the data log sampling cycle. This parameter is only available on an HOA keypad. 100 ms
(100 - 60000 ms)
o5-03
(1553)
RUN
Log Monitor Data 1 Sets the data log monitor. This parameter is only available on an HOA keypad. 101
(000, 101 - 1299)
o5-04
(1554)
RUN
Log Monitor Data 2 Sets the data log monitor. This parameter is only available on an HOA keypad. 102
(000, 101 - 1299)
o5-05
(1555)
RUN
Log Monitor Data 3 Sets the data log monitor. This parameter is only available on an HOA keypad. 103
(000, 101 - 1299)
o5-06
(1556)
RUN
Log Monitor Data 4 Sets the data log monitor. This parameter is only available on an HOA keypad. 107
(000, 101 - 1299)
o5-07
(1557)
RUN
Log Monitor Data 5 Sets the data log monitor. This parameter is only available on an HOA keypad. 108
(000, 101 - 1299)
o5-08
(1558)
RUN
Log Monitor Data 6 Sets the data log monitor. This parameter is only available on an HOA keypad. 0
(0, 101 - 1299)
o5-09
(1559)
RUN
Log Monitor Data 7 Sets the data log monitor. This parameter is only available on an HOA keypad. 000
(000, 101 - 1299)
o5-10
(155A)
RUN
Log Monitor Data 8 Sets the data log monitor. This parameter is only available on an HOA keypad. 000
(000, 101 - 1299)
o5-11
(155B)
RUN
Log Monitor Data 9 Sets the data log monitor. This parameter is only available on an HOA keypad. 000
(000, 101 - 1299)
o5-12
(155C)
RUN
Log Monitor Data 10 Sets the data log monitor. This parameter is only available on an HOA keypad. 000
(000, 101 - 1299)