EasyManuals Logo

YASKAWA HV600 Installation & Startup

YASKAWA HV600
310 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
3.12 Prevent Switching Surge
68 YASKAWA TOEPYAIH6B01A HV600 AC Drive Narrow Bypass Installation & Startup
3.12 Prevent Switching Surge
◆ Connect a Surge Protective Device
A surge protective device decreases the surge voltage generated when you switch an inductive load near the drive.
Inductive loads include:
• Magnetic contactors
• Electromagnetic relays
• Magnetic valves
• Solenoids
• Magnetic brakes.
Always use a surge protective device or diode with inductive loads.
Note:
Do not connect a surge protective device to the drive output side.

Table of Contents

Other manuals for YASKAWA HV600

Preview: Technical Reference
Technical Reference794 pages

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the YASKAWA HV600 and is the answer not in the manual?

YASKAWA HV600 Specifications

General IconGeneral
CategoryDC Drives
SeriesHV600
Overload Capacity150% for 60 seconds
Output Voltage0 - Input Voltage
EnclosureNEMA 1, NEMA 12
CommunicationEthernet/IP, Modbus, DeviceNet, Profibus
SafetySafe Torque Off (STO)
Protection FeaturesOvercurrent, Overvoltage, Undervoltage, Short Circuit
Humidity5-95% (non-condensing)
AltitudeUp to 1000m (3280ft) without derating
Control MethodVector Control

Related product manuals