EasyManua.ls Logo

YASKAWA HV600

YASKAWA HV600
310 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parameter List
7
7.12 S: Special Applications
YASKAWA TOEPYAIH6B01A HV600 AC Drive Narrow Bypass Installation & Startup 227
No.
(Hex.)
Name Description
Default
(Range)
S2-13
(3212)
Timer 3 Day Selection Sets the days for which sequence timer 3 is active.
0 : Timer Disabled
1 : Daily
2 : Mon - Fri
3 : Sat - Sun
4 : Monday
5 : Tuesday
6 : Wednesday
7 : Thursday
8 : Friday
9 : Saturday
10 : Sunday
0
(0 - 10)
S2-14
(3213)
Timer 3 Sequence Selection Sets the drive response when sequence timer 3 is active.
0 : Digital Out Only
1 : Run
2 : Run - PID Disable
0
(0 - 2)
S2-15
(3214)
Timer 3 Reference Source Selects the frequency reference source to run the drive when sequence timer 3 is active (only
applicable when S2-14 > 0 [Timer 3 Sequence Selection ≠ Digital Out Only]).
0 : Operator (d1-01/YA-01)
1 : Operator (d1-02/YA-02)
2 : Operator (d1-03/YA-03)
3 : Operator (d1-04/YA-04)
4 : Terminals
5 : Serial Com
6 : Option PCB
8 : Set by b1-01
Note:
For reference source 0 to 3, the drive will use d1-xx frequency reference when PID mode is
disabled and YA-xx setpoint when PID is enabled.
0
(0 - 8)
S2-16
(3215)
Timer 4 Start Time Sets the start time for timer 4.
Note:
• Default is when o4-22 = 1 [Time Format = 12 Hour Clock]. When o4-22 = 0 [24 Hour Clock],
default is 00:00. When o4-22 = 2 [12 Hour JP Clock], default is 00:00 AM.
• Range is when o4-22 = 1. When o4-22 = 0, range is 00:00 to 24:00. When o4-22 = 2, range is
00:00 AM to 11:59 PM.
12:00
(12:00 AM - 11:59 PM)
S2-17
(3216)
Timer 4 Stop Time Sets the stop time for timer 4.
Note:
• Default is when o4-22 = 1 [Time Format = 12 Hour Clock]. When o4-22 = 0 [24 Hour Clock],
default is 00:00. When o4-22 = 2 [12 Hour JP Clock], default is 00:00 AM.
• Range is when o4-22 = 1. When o4-22 = 0, range is 00:00 to 24:00. When o4-22 = 2, range is
00:00 AM to 11:59 PM.
12:00
(12:00 AM - 11:59 PM)
S2-18
(3217)
Timer 4 Day Selection Sets the days for which sequence timer 4 is active.
0 : Timer disabled
1 : Daily
2 : Mon - Fri
3 : Sat - Sun
4 : Monday
5 : Tuesday
6 : Wednesday
7 : Thursday
8 : Friday
9 : Saturday
10 : Sunday
0
(0 - 10)

Table of Contents

Other manuals for YASKAWA HV600

Related product manuals