YASKAWA varispeed G7 CIMR-G7B series

Maintenance and Inspection
8-9
Attaching the Fan Cover
1. Tilt the fan cover toward the bottom of the Inverter as shown in Fig 8.4 and insert it to the mounting hole
until it meets with A.
Fig 8.4
2. Push the fan cover toward the top of the Inverter.
Fig 8.5
3. Make sure that there is no gap between the fan cover and A. Then screw it in place with the three screws.
Fig 8.6
Fan cover
A
Bottom Inverter
Cooling fan
Top Inverter
NG
Make sure that
there is no gap.
A
A