YASKAWA varispeed G7 CIMR-G7B series User Manual

3-6
 Switching Modes
The mode selection display will appear when the MENU Key is pressed from a monitor or setting display.
Press the MENU Key from the mode selection display to switch between the modes.
Press the DATA/ENTER Key from the mode selection key to monitor data and from a monitor display to
access the setting display.
Fig 3.3 Mode Transitions
IMPORTANT
When running the Inverter after using Digital Operator, press the MENU Key to select the drive mode (dis-
played on the LCD screen) and then press the DATA/ENTER Key from the drive mode display to bring up the
monitor display. Run Commands can't be received from any other display. (Monitor display in the drive mode
will appear when the power is turned ON.)
Monitor Display Setting Display
Mode Selection
Display
Display at Startup
乥⥛ᣛҸ
'5,9(
偅ࡼ῵ᓣ
'5,9(
*
*  
*
ㅔᯧ⿟ᑣ῵ᓣ
48,&.
*
*  
*
催㑻⿟ᑣ῵ᓣ
$'9
*
*  
*
󰶖偠῵ᓣ
9(5,)<
*
*  
*
㞾ᄺд῵ᓣ
$781(
*
*  
*
5G\
8 +]
ⲥ㾚
'5,9(
5G\
0(18
(6&
'$7$
(17(5
᥻ࠊ῵ᓣ䗝ᢽ
48,&.
$ 
⦃๗䆒ᅮ
$'9
᮴ব᳈
9(5,)<
乥⥛ᣛҸ
'5,9(
8  +]
乥⥛ᣛҸ
'5,9(
5G\
0(18
0(18
0(18
0(18
˚
5(6(7
(6&
'$7$
(17(5
(6&
(6&
'$7$
(17(5
᮴3*ⶶ䞣᥻ࠊ
48,&.
$  
'$7$
(17(5
(6&
'$7$
(17(5
(6&
'$7$
(17(5
᭛ᄫ䗝ᢽ
$'9
(6&
$'9
Ё᭛
(6&
'$7$
(17(5
˚
5(6(7
'$7$
(17(5
(6&
'$7$
(17(5
(6&
'$7$
(17(5
'$7$
(17(5
(6&
䗝ᢽ㞾ᄺд῵ᓣ
$781( $781(

5G\
$   

7  

7   


8 +]
$ 
$  

8 +]
ᮟ䕀ᔶ㞾ᄺд
The constant number will be displayed if a
constant has been changed. Press the
DATA/ENTER Key to enable the change.

YASKAWA varispeed G7 CIMR-G7B series Specifications

General

Brand	YASKAWA
Model	varispeed G7 CIMR-G7B series
Category	Inverter
Language	English