YASKAWA Z1000 - Page 289

A
B
C
A – Sealing nut
B – Sealing insert
C – Clamping claw
Figure 7.31 Remove the Cable Gland: 4A0124
9.
Turn the fan unit over and replace the cooling fan. Install the fan so the air flows upward.
Figure 7.32 Replace the Cooling Fan: 4A0124
n
Installing the Cooling Fan Unit: 4A0124
Note: Do not pinch the fan cable between parts when reassembling the fan unit.
1.
Allow the fan cable to pass through the cable gland body, then pull apart the opening in the sealing insert and fit the
insert around the cable.
A
B
C
A – Clamping claw
B – Sealing insert
C – Opening
Figure 7.33 Reassemble the Cable Gland: 4A0124
7.5 Drive Cooling Fans
YASKAWA ELECTRIC SIEP YAIZ1B 01E YASKAWA AC Drive – Z1000 Bypass Technical Manual
289
7
Periodic Inspection & Maintenance