YASKAWA Z1000 - Page 453

No. Name
User
Setting
Z4-08
Subnet Mask 4
Z4-09
Gateway Address 1
Z4-10
Gateway Address 2
Z4-11
Gateway Address 3
Z4-12
Gateway Address 4
Z4-13
Address Startup Mode
Z4-14
Duplex Mode Setting
Z4-15
Speed Mode Setting
No. Name
User
Setting
Z4-16
Timeout
Z4-17
Speed Scaling
Z4-18
Current Scaling
Z4-19
Torque Scaling
Z4-20
Power Scaling
Z4-21
Voltage Scaling
Z4-22
Time Scaling
<1> This parameter will only appear when Modbus N2 or P1 is selected. (Z3-01= 0, 1, or 2)
<2> This parameter will only appear when Bacnet is selected. (Z3-01= 3)
<3> Available in bypass controller software versions VST800400 and later.
<4> Available in bypass controller software versions VST800299 and earlier.
H.3 User Setting Table
YASKAWA ELECTRIC SIEP YAIZ1B 01E YASKAWA AC Drive – Z1000 Bypass Technical Manual
453
H
Quick Reference Sheet