Drives Mounted on Z1000 Bypass Models Z1B1D143 to D273 and B124 to B302
1.
Remove the terminal cover.
2.
Loosen the installation screw on the front cover.
Figure 3.29 Loosen the Installation Screw (Models Z1B1D143 to D273 and B124 to B302)
3.
Push the hooks on each side of the cover that hold it in place.
Figure 3.30 Remove the Front Cover (Models Z1B1D143 to D273 and B124 to B302)
3.5 Control Circuit Wiring
78
YASKAWA ELECTRIC SIEP YAIZ1B 01E YASKAWA AC Drive – Z1000 Bypass Technical Manual
To Next Page
Loading...
