User Guide for the SIP-T19(P) E2 IP Phone
80
Call forward is configurable via web user interface at the path Features->Forward&DND.
Note
To configure the forward authorized numbers via web user interface:
1. Click on Features->Forward&DND.
2. Select Enabled from the pull-down list of Forward Emergency.
3. Enter the numbers in the Forward Authorized Numbers field.
For multiple numbers, enter a comma between every two numbers.
4. Click Confirm to accept the change.
When call forward is enabled on the phone, the phone cannot forward incoming calls from
the numbers specified in the Forward Authorized Numbers field.
Note
To disable call forward via phone user interface:
Do one of the following:
- Press when the phone is idle.
- Press Menu->Features->Call Forward.
Press or to select the desired forwarding type and then press the Enter soft key.
Press or , or the Switch soft key to select Disabled to disable the call forward.
You can also enter the SIP URI or IP address in the Forward to field. For more information on
using the SIP URI or IP address, refer to Placing Calls on page 65.
Call forward is local to the phone, and may be overridden by the server settings. Call forward on
code or off code may be different between servers. For more information, contact your system
Forward authorized number is configurable via web user interface only.
To Next Page
Loading...
Need help?
General