4) Press Save hot key to save the changes.
5) Press Back hot key to return to the previous screen.
Time and Date
The time and date appears on the idle screen of the IP phone. If the phone cannot
obtain a time and date from the call server, please contact your system administrator if
the time or date is incorrect. You can set the time manually or via the SNTP server
which is used to synchronize the time.
To change the Time and Date via the Phone interface:
1) Press Menu->Settings->Basic Settings->Time & Date.
2) If SNTP Settings is chosen, the phone will automatically get the time from the
specific NTP Server. Use the navigation keys to highlight the specific option and the
relating changes. You can set the Time Zone, NTP Server1/Server2, and Daylight
Saving respectively.
3) If Manual Setting is chosen, the time can be set manually. Use the navigation keys
to highlight the option and enter the specific date and time.
4) Press Save hot key, the time appears on the idle screen will be changed. Press Back
hot key to return to the previous screen.
To set the time format via the Phone interface:
1) Press Menu->Settings->Basic Settings->Time & Date->Time & Date Format.
2) Use the Switch hot key to choose a preferred time format: 12 hour or 24 hour.
To Next Page
Loading...
Need help?
General
