Yealink T22P Guide

Enterprise IP Phone Using the Basic Call Functions
- 49 -
Call Completion
Have encountered such a situation? When you call a contact, but the other side is busy
on a call. Do you want the server to inform you immediately when the contact end the
call, in order to establish a conversation with each other in time? Call Completion can
help you to solve this problem.
To configure Call Completion via phone interface:
1) Press the following hot keys: Menu->Features ->Call Completion to enter the
configuration page.
2) By the Switch soft key, choose whether to enable this option.
3) Press the Save soft key to save your changes.

Yealink T22P Specifications

General

Protocol	SIP
Power over Ethernet	Yes (IEEE 802.3af)
Weight	0.77kg
Audio Features	Full-duplex speakerphone
Lines	3
Codecs	G.722, G.711
Standards Compliance	IEEE802.3af
Dimensions	209mm x 188mm x 150mm x 41mm
Headset Port	RJ9