To configure PC Port settings via Phone interface:
1) Press Menu->Settings->Advanced Settings.
2) Enter the password required, scroll to Network option, then press Enter hot key,
select PC port and press Enter hot key.
3) If you choose Bridge, it will return to the previous menu.
4) If you choose Router, you will be prompted to enter the IP Address, Subnet Mask,
DHCP Server Disable/Enable.
5) Press Save hot key to save the changes, or Back hot key to return to the previous
menu.
To configure PC Port settings via Web interface:
Choose Network-> PC Port to do the relating configuration. You can consult your system
administrator for more information.
VLAN Setting
VLAN is a group of hosts with a common set of requirements that communicate as if
they were attached to the Broadcast domain, regardless of their physical location. The
following table lists the instruction of the field about the VLAN Setting.
When the network capacity is insufficient, QoS could provide priority
to users by setting the value.
Users can choose the WebServer type: Disable, HTTP, HTTPS, or
HTTPS & HTTP.
To configure VLAN settings via Phone interface:
1) Press Menu->Settings->Advanced Settings.
2) Enter the password required, scroll to Network option, then press Enter hot key,
select VLAN and press Enter hot key.
3) Choose WAN Port, press Enter hot key.
To Next Page
Loading...
Need help?
General
