Yealink T22P Guide

Enterprise IP Phone Using the Advanced Phone Functions
- 85 -
To assign the key as Local Group:
1) Choose Phone->DSS Key->Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, choose Local Group from
the list.
2) In the Line field, choose a group.
3) Press Confirm button to save the changes.
Broadsoft Group
The keys can be configured as Broadsoft Group. Then pressing this key under the idle
status, you can enter the Broadsoft Group interface.
To assign the key as Broadsoft Group:
1) Choose Phone->DSS Key->Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the Type field, choose Broadsoft Group
from the list.
2) In the Line field, choose a broadsoft Group to specify the record, so you must
configure the Broadsoft Group at first.
3) Press Confirm button to save the changes.
Tone Settings
You can define the frequency and time period of all the following tones：
 Dial
 Ring Back
 Busy
 Congestion
 Call Waiting
 Dial Recall
 Record
 Info
 Stutter
 Message
 Auto Answer
To edit the tone filed via Web interface:
1) Choose Phone->Tones.
2) Enter the frequency and time period(in ms) as the following format:
Frequency /Time Period (for example 400/200).
3) Press Confirm button to save the changes, Cancel to cancel the change.
Note:
1. Please contact your system administrator for more information about the

Yealink T22P Specifications

General

Protocol	SIP
Power over Ethernet	Yes (IEEE 802.3af)
Weight	0.77kg
Audio Features	Full-duplex speakerphone
Lines	3
Codecs	G.722, G.711
Standards Compliance	IEEE802.3af
Dimensions	209mm x 188mm x 150mm x 41mm
Headset Port	RJ9