EasyManuals Logo

Yealink T22P Guide

Yealink T22P
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
Enterprise IP Phone Using the Advanced Phone Functions
- 62 -
TLS
TLS(Transport Layer Security), an IETF standards track protocol(RFC 5246), was based
on the earlier SSL specifications developed by Netscape Corporation.
If you make a call based on TLS and SRTP (Set the transport as TLS and the SRTP as
On), the IP phone UI will display the connecting and ring back interface. If the reception
also set the transport as TLS, then IP Phone UI will display the icon on both side.
Go to Account->Basic, choose Transport option, in the pull-down menu, you can choose
the TLS option, and then click the Confirm button to save the change.
DNS-SRV
If the SIP server cannot be used, the phone will be connected on the server which is
available.
To set DNS-SRV via web interface:
Go to Account->Basic, choose Transport option, in the pull-down menu, you can choose
the DNS-SRV option, and then click the Confirm button to save the change.

Table of Contents

Other manuals for Yealink T22P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink T22P and is the answer not in the manual?

Yealink T22P Specifications

General IconGeneral
ProtocolSIP
Power over EthernetYes (IEEE 802.3af)
Weight0.77kg
Audio FeaturesFull-duplex speakerphone
Lines3
CodecsG.722, G.711
Standards ComplianceIEEE802.3af
Dimensions209mm x 188mm x 150mm x 41mm
Headset PortRJ9

Related product manuals