Yealink T22P Guide

Enterprise IP Phone Using the Basic Call Functions
- 40 -
Note:
1. In the Account field, you can enter 1,2,3…, “1” represents Account 1, “2” represents
Account 2 ……, if the account box is empty, it mean this rule works for all accounts .
Feature Synchronisation
When enabled the synchronize function, configure the DND/FWD function on device or
server, DND/FWD status on device and server will be in correspondence.
To set Feature Key Synchronisation via the Web interface:
1） Choose Phone->Features-> Feature Key Synchronisation
2） There is a pull-down menu in the Type field, choose Intercom from the list.
3） Choose whether to enable this function from the pull-down menu.
4） Click the Confirm to save the change.

Yealink T22P Specifications

General

Protocol	SIP
Power over Ethernet	Yes (IEEE 802.3af)
Weight	0.77kg
Audio Features	Full-duplex speakerphone
Lines	3
Codecs	G.722, G.711
Standards Compliance	IEEE802.3af
Dimensions	209mm x 188mm x 150mm x 41mm
Headset Port	RJ9