Enterprise IP Phone Using the Basic Call Functions
Audio Settings
Volume
You can adjust the volume of handset/speaker/headset/Ring Volume.
To adjust the volume when you are not in an active call:
1) Press Menu->Settings->Basic Settings.
2) Scroll to Phone Volume, and press Enter hot key, highlight the one you want to
adjust the volume, use the Volume Adjustment Bar or navigation keys to adjust the
volume.
3) Press OK hot key to save the change or Back hot key to cancel.
4) And you can also press the Volume Adjustment Bar to adjust the ring volume when
the phone is in idle status.
To adjust the volume when you are on an active call:
When Handset/Headset/Hands-free mode is activated, press the Volume Adjustment
Bar to a comfortable level.
Note:
The volume can only be adjusted via Phone interface. When you adjust the ring volume
to 0, or press the Silence hot key when there is incoming call, the icon will be
shown on the LCD. Press the Volume Adjustment Bar to adjust the volume, and the icon
will disappear.
Ring Tones
You can adjust the type and volume of the ring tone.
To adjust the Ring Tone Type via Phone interface:
1) Press Menu->Settings->Basic Settings.
2) Scroll to Ring Tone, and press Enter hot key.
3) Use the navigation keys to highlight the specific one.
4) Press Save hot key to save the change or Back hot key to cancel.
To change the Ring Tone Type via Web interface:
To Next Page
Loading...
Need help?
General
