Always: Incoming calls are immediately forwarded.
Busy: Incoming calls are immediately forwarded when the phone is busy.
No Answer: Incoming calls are forwarded when the phone is not answered after a
specific period.
To configure Call Forward via Phone interface:
1) Press the following hot keys: Menu->Features->Call Forward->Enter.
2) There are 3 options: Always Forward, Busy Forward and No Answer Forward.
3) Choose one of them, enter the phone number you want to forward.
4) If you want to realize this function by the server, please enter the On Code and Off
Code option, then when you choose to enable the call forward function via your IP
phone, it will send message to the server, and the server will turn on the function
immediately. When there are calls to the extension, the server will forward it to the
set number automatically based on the forward type. And the IP phone will not
show the record in the call history anymore.
5) Press Save to save the changes.
To configure Call Forward via Web interface:
Choose Phone->Features->Call Forward to do the relating changes. Please refer the
above configuration information.
Intercom
Intercom mode is useful in an office environment as a quick access to connect to the
operator or the secretary.
To configure Intercom option via phone interface:
1) Press the following hot keys: Menu->Features->Enter->Intercom->OK to enter
the configuration page.
To Next Page
Loading...
Need help?
General
