EasyManuals Logo

Yealink T22P Guide

Yealink T22P
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
Enterprise IP Phone Using the Advanced Phone Functions
- 65 -
4) Set the VLAN Status, and input the VID Number, Priority.
5) Press Save hot key to save the settings, or Back hot key to return to VLAN menu.
6) Follow the same way to set the PC Port option.
To configure VLAN settings via Web interface:
Choose Network->Advanced to do the relating configuration. You can consult your
system administrator for more information.
LLDP
The Link Layer Discovery Protocol (LLDP)is a vendor-neutral Layer 2 protocol that
allows a network device to advertise its identity and capabilities on the local network.
Enable LLDP function; the phone will go to switch to get related VLAN parameters
automatically. (Synchronous with VALAN in switch)
To configure LLDP settings via Web interface:
1) Choose Network->Advanced->LLDP->Active option, in the pull-down menu,
choose enable.
2) Then enter the corresponding Packet Interval in Packet Interval field.
3) You can also disable this function when you choose disable in active field.
4) Click the Confirm button to save the change.

Table of Contents

Other manuals for Yealink T22P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink T22P and is the answer not in the manual?

Yealink T22P Specifications

General IconGeneral
ProtocolSIP
Power over EthernetYes (IEEE 802.3af)
Weight0.77kg
Audio FeaturesFull-duplex speakerphone
Lines3
CodecsG.722, G.711
Standards ComplianceIEEE802.3af
Dimensions209mm x 188mm x 150mm x 41mm
Headset PortRJ9

Related product manuals