Yealink Teams Edition MP56

| Operating Calls | 30
Answering a Call When in a Call
You can answer the incoming call when you are in an active call.
Procedure
Tap on the touch screen.
The active call is placed on hold and the incoming call becomes active.
Muting and Unmuting Audio
You can mute the microphone during an active call so that the other party cannot hear you.
Procedure
1.
During a call, press the mute key on the phone or tap on the touch screen.
The mute key glows red.
2.
To unmute audio, press the mute key on the phone or tap on the touch screen.
The mute key glows green.
Holding and Resuming Calls
When you are in a call, you can place an active audio call on hold and resume the call when you are ready.
• Placing a Call on Hold
• Resuming a Call
Placing a Call on Hold
Procedure
During a call, press or tap > Put call on hold.
Resuming a Call
Procedure
Do one of the following:
•
If only one call is placed on hold, press or tap Resume.
•
If multiple calls are placed on hold, tap on the right side of the desired held call.
Ending or Rejecting an Active Call
Procedure
Tap .