| Teams Device Settings | 44
Changing the Screen Saver Background
You can change the screen saver background of the device. You can also set the device to display the
custom background.
Procedure
1.
Go to > Settings > Device Settings > Display.
2. Select the desired type from the Screen Saver Type field.
• If you select System, select the desired background from the Screensaver background field.
• If you select Custom, the device automatically set the custom pictures uploaded from the web user
interface as the screen saver, and display these pictures alternately.
3. Tap OK.
Note: If your phone is set as a common area phone, go to > Settings > Device Settings >
Screen Saver(Admin only, default password: admin) > Screensaver background to change
the screen saver background.
Changing the Screen Backlight Brightness and Time
You can change the backlight brightness of the LCD when the device is active (in use). The backlight
brightness automatically changes after the device has been idle for a specified time.
About this task
You can change the screen backlight brightness and time in the following settings:
Backlight Active Level: The brightness level of the phone screen when the phone is active.
Backlight Time: The delay time to change the brightness of the LCD screen when the device is inactive.
Backlight time includes the following settings:
• Always On: Backlight is on permanently.
• 15s, 30s, 1min, 2min, 5min, 10min , 30min, 45min or 1h: Backlight is turned off when the device is
inactive after the designated time.
Procedure
1.
Go to > Settings > Device Settings > Display.
2. Slide the Backlight Active Level slider to change the brightness of the LCD backlight.
3. Select the desired time from the Backlight Time field.
4. Tap OK.
Bluetooth
The Teams device supports Bluetooth. You can pair and connect the Bluetooth headset with your phone.
• Activating the Bluetooth Mode
• Pairing and Connecting the Bluetooth Headset
• Editing Your Device Name
• Disabling Your Device Discovery
• Renaming the Paired Bluetooth Devices
• Disconnecting the Bluetooth Device
• Un-pairing the Bluetooth Devices
To Next Page
Loading...
Need help?
General
